Abstract

The influence of nickel carriers minerals, contained in three different laterite ore samples, on their extraction by a sulfation-roasting-leaching process, is investigated in this paper. X-ray diffraction, scanning electron microscopy coupled to energy dispersive spectroscopy and chemical analyses by atomic absorption spectrometry were the techniques employed to characterize ore samples and leaching solid residues. Phase quantification was carried out by the Rietveld method. Nickel recovery showed to be strongly dependent on the minerals to which it was associated. Unlike expected, almost all the nickel contained in silicate minerals was extracted; however, some silicates, especially serpentine, interfere in nickel extraction when it is predominantly associated with the octahedral sites of goethite. The highest nickel recovery (93.0%) was achieved with the sample in which goethite was the main nickel carrier and its serpentine content was the lowest. The worst nickel recovery (76.1%) was obtained with the sample in which its association was predominantly with silicate minerals and the amorphous phase. Cobalt recoveries were higher than 81.0% for the three processed samples.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.