Abstract
The injection kicker system for the Future Circular Collider (FCC-hh) must satisfy demanding requirements. To achieve low pulse ripple and fast field rise and fall times, the injection system will use ferrite loaded transmission line type magnets. The beam coupling impedance of the kicker magnets is crucial, as this can be a dominant contribution to beam instabilities. In addition, interaction of the high intensity beam with the real part of the longitudinal beam coupling impedance can result in high power deposition in the ferrite yoke. This gives a significant risk that the ferrite yoke will exceed its Curie temperature: hence, a suitable beam screen will be a critical feature. In this paper, we present a novel concept - a spiral beam screen. The fundamental advantage of the new design is a significant reduction of the maximum voltage induced on the screen conductors, thus decreased probability of electrical breakdown. In addition, the longitudinal beam coupling impedance is optimized to minimize power deposition in the magnet.
Highlights
The FCC-hh will have two injection kicker systems to inject counter rotating proton beams
Interaction of the high intensity beam with the real part of the longitudinal beam coupling impedance can result in high power deposition in the ferrite yoke
A cell consists of a C-core NiZn ferrite sandwiched between two high voltage (HV) capacitance plates: a plate connected to ground is situated between the two HV plates
Summary
The FCC-hh will have two injection kicker systems to inject counter rotating proton beams. To limit power deposition in the ferrite yoke, a beam screen will be placed in the aperture of each kicker magnet [1]. In the initial beam screen design for the FCC-hh injection kicker, Loverlap = 56 mm.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
