Abstract
The recent increase in natural gas production has expanded the outlook for exporting domestically produced natural gas. As a result, many existing liquefied natural gas (LNG) import facilities in the United States are proposing to construct liquefaction facilities collocated with existing import terminals. The Federal Energy Regulatory Commission (FERC) reviews and approves applications for construction. As part of this process, the applicant must perform specific hazardous release consequence analyses to demonstrate flammable vapor dispersion exclusion zones, thermal radiation exclusion zones, and explosion overpressure exclusion zones to meet criteria established in 49 CFR 193 and NFPA 59A.Over the last few years, FERC has refined the risk analysis criteria for LNG facility construction projects. While the current regulations do not specify quantitative risk assessment (QRA) as a necessary hazard analysis tool, FERC has recently issued guidance for the selection of leak sizes based upon failure frequencies for piping systems. In particular, scenarios with failure frequencies greater than 3 × 10−5 per year must be considered. The underlying studies that FERC relied upon to derive the failure frequency criterion for single accidental leak source size determination (i.e., 3 × 10−5 to 5 × 10−5 per year) are largely based on generic industry data not LNG‐specific data. The net result of this criterion has been to require elements of QRA as part of LNG facility permitting process to identify the scenarios that need to be considered and those that do not. This is a shift in the paradigm away from prescriptive leak sizes and single accidental release scenarios that had been used for receiving terminals constructed over the last decade.This shift in paradigm coincides with and was likely motivated by the North American transition from receiving terminals to liquefaction export terminals. Receiving terminals are considerably simpler in their design than export terminals, which require refrigeration units to liquefy the gas. This article aims to provide an analysis and discussion of the FERC failure frequency arguments grounded in the strength and weaknesses of the underlying databases. An open question is whether this new criterion provides a reasonable improvement in safety over the prior requirements. The underlying historic databases and studies do not reflect the major differences on the safety records between the LNG industry and general industry. More specifically, they do not necessarily take into consideration the effects of cryogenic processes, management systems, materials of construction, or failure modes on the failure rate data. Given the basis of generic industry failure rates, the question arises as to whether the failure rate thresholds that trigger the requirement to consider certain scenarios are appropriate. © 2014 American Institute of Chemical Engineers Process Saf Prog 33: 237–246, 2014
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have