Abstract
AbstractIn this study, aiming to reduce the environmental impact of plastics, new composite materials containing recycled fibers from used paper coffee cups and oil extracted from spent coffee grounds (SCG) were produced. Accordingly, the cellulose fibers were chemically modified using lactic acid to be used as poly(lactic acid) filler reinforcement. The obtained results revealed that its addition improved the mechanical properties of the ensuing composites. The addition of 30% wt/wt of unmodified and modified fibers increased the Young modulus by 53% and 72%, respectively. In addition, enhanced biodegradability was obtained due to higher water absorption (up to 4% wt/wt). In parallel, coffee oil was used as a plasticizer and the affinity between the plasticizer and polymer matrix was confirmed by the lack of phase separation, by the improved flexibility of derived materials (the addition of 40% wt/wt of plasticizer increased the elongation at break by 86%) and by the better processability of the ensuing materials (the addition of 30% wt/wt of plasticizer increased the MFI by 205%). Overall, the results suggest that the use of modified cellulose fibers and the addition of SCG oil‐based plasticizer can be promising routes to produce eco‐friendly plastics.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
