New Ni‐Cr‐Mo alloy demonstrates high‐temperature structural stability with resultant increases in corrosion‐resistance and mechanical properties

Abstract

AbstractEquipment made of NiCrMo alloys of the Ni 16 Cr 16 Mo W and Ni 22 Cr 16 Mo types is used extensively in the chemical industry, in particular because the corrosion resistance in the as‐welded condition could be improved in recent years by controlling C and Si contents to very low levels. A new type of alloy — Hastelloy Developmental Alloy C‐455 — has high resistance to carbide and intermetallic phase precipitation at high temperatures. By reducing the amount of these phases it has been possible to considerably improve the high temperature properties, the corrosion resistance and the mechanical properties of the alloy. The new material may be exposed to sensitizing range temperatures (550–1090 °C) for a long time without becoming susceptible to corrosion: it is, therefore, readily weldable. Contrary to NiCrMo alloys known so far there are almost no problems when the material is exposed to hydrochloric and sulfuric acids.