Abstract
Gravimetric methods were initially employed to examine the influence of inhibitor IB-1 on the corrosion rate of steel in formation water with oil, which contained hydrogen sulfide, carbon dioxide, and a combination of both. In order to assess the effectiveness of inhibitor IB-1, laboratory tests were conducted using samples of steel of grade St3. Corrosion experiments were conducted within sealed containers with a volume of 0.5 liters, using samples sized 30201 mm. The effectiveness of the IB-1 inhibitor in formation water with oil, containing hydrogen sulfide, carbon dioxide, and a simultaneous presence of hydrogen sulfide and carbon dioxide, exhibited a variation within the ranges of 88.3% to 98.0%, 72.4% to 92.7%, and 60.22% to 94.83%, respectively. The laboratory investigations allowed for the determination of the optimal concentration of inhibitor IB-1 to inhibit the growth of sulfate-reducing bacteria and protect steel of grade St3 from corrosion induced by hydrogen sulfide, carbon dioxide, and the concurrent presence of hydrogen sulfide and carbon dioxide.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.