Abstract
AbstractIonic polymer–metal composite (IPMC) actuators that display continuously large actuation displacements without back relaxation and with large blocking force at low direct current (DC) voltages are used as biomimetic sensors, actuators and biomedical devices. This article reports the preparation and actuation performance of new IPMC actuators based on the polyvinylidene fluoride (PVDF)/polystyrene sulfonic acid (PSSA)/polyvinyl pyrrolidone (PVP) polymer blend membrane, which requires low voltage DC. The performance results of the proposed IPMC actuators are compared with Nafion‐based IPMC actuators. In the blend membrane, PVDF is the hydrophobic polymer, PSSA is the polyelectrolyte, and PVP is the hydrophilic basic polymer. The proposed IPMC actuators based on the PVDF/PSSA/PVP blend membrane of polymer mixture ratios of 60/15/25 and 50/25/25 gave higher actuation displacement and higher blocking force at low DC voltages than the Nafion‐based IPMC actuator. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.