Abstract
The environmental impact of the use of fossil fuels for energy can be reduced if electricity, which represents one-third of all energy uses, can be generated totally from renewable/sustainable sources such as wind and solar. However, this is only possible if cost-effective long-duration storage technologies are available to allow the highly variable and unpredictable wind and solar energy sources to become reliable baseline energy sources like coal, nuclear or natural gases. Redox flow battery (RFB) energy storage systems are highly suitable for this large-scale, long-duration storage application because while their power output scales with the size of the battery, their energy content resides in the amount of active materials that are stored in external tanks and can be easily scaled up for longer duration.1 The conventional redox flow batteries store electrical energy in the form of some aqueous or non-aqueous soluble ions or compounds in the electrolyte solution. Because of the low solubility (< 2M) of most ions and compounds in aqueous and non-aqueous solvents, these redox flow battery systems have low energy density.2–4 For example, the commercialized all-vanadium RFB system has an average energy density of 20 Wh/kg while that of the lithium-ion battery system is 100-265 Wh/kg.5 To store enough energy for 3-5 days in these RFBs requires a very large volume of solution in a large number of tanks, making these RFB systems expensive due to the cost of tanks and the fluid distribution system and floor space. Our group recently developed a new storage approach that can greatly increase the energy storage density while still enabling the flow battery concept.6 In this approach, the reactants are stored as both soluble ions and their undissolved solid forms and only the liquid containing the soluble ions is circulated through the batteries. This approach potentially enables >4X increase in the storage energy density. This technology was recently demonstrated in a hydrogen-vanadium (VI/V) system, and new test results and findings in this area will be presented in this talk.References H. Zhang, W. Lu, and X. Li, Electrochemical Energy Reviews, 1–15 (2019).D. G. Kwabi et al., Joule, 2, 1894–1906 (2018).M. Wu, T. Zhao, H. Jiang, Y. Zeng, and Y. Ren, Journal of Power Sources, 355, 62–68 (2017).C. Ding, H. Zhang, X. Li, T. Liu, and F. Xing, The Journal of Physical Chemistry Letters, 4, 1281–1294 (2013).A. Manthiram, ACS Central Science, 3, 1063–1069 (2017).Y. Li and T.V. Nguyen, “A Solid-Liquid High-Energy-Density Storage Concept for Redox Flow Batteries and Its Demonstration in an H2-V System,” Paper ID APEN-MIT-2021_023, Applied Energy Symposium: MIT A+B, Aug. 11-13, 2021, Cambridge, MA, USA.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.