Abstract
The pre-injector of the Taiwan Light Source (TLS) is consists of a 140 kV thermionic gun and a 50 MeV travelling wave type linear accelerator (linac) system. A linac control system has been renewed to avoid obsolescence. It is also utilized to improve performance, decouple the vacuum interlock logic from the linac control system, and provide a better control functionality for top-up operation. One VME crate system is dedicated for the linac control, the new hardware equipped with high resolution of analogue interface to provide better control. Vacuum interlock logic will be done via a dedicated programmable logic controller (PLC). The remained linac devices, which are necessary for sequential control such as door access interlock, klystron warm up, gun warm up, trigger interlock, gun high voltage interlock, klystron modulator high voltage interlock, water flow interlock, will be done by another PLC. Both interlock and sequential control of PLC will be controlled by the VME crate. All of the other functions without interlock or sequence requirement will be controlled by the VME crate directly as well. New control system is expected to provide better control functionality, better performance, easy for maintenance, and useful easy to add new hardware equipments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.