New Cathode Materials for Chlorate Electrolysis

Abstract

Nanocrystalline Ti‐Ru‐O alloys of different composition were made by high‐energy ballmilling Ti and powders. Upon milling, reacted with Ti to form Ti oxides, Ru‐like hexagonal‐close‐packed (hcp) phase, and a cubic Ti‐Ru‐(O) alloy. After 40 h of milling, the final product was primarily a Ti‐Ru‐O alloy with iron impurities from the steel balls and crucible. A high ball‐to‐powder weight ratio resulted in higher impurity (iron) content. Most of the iron in the powder did not exist as α‐Fe particles but entered into the alloy lattice forming a Ti‐Ru‐(Fe)‐(O) cubic phase. The incorporation of iron did not affect the catalytic performance very much. The electrocatalytical activity of the studied cathode materials for the hydrogen evolution reaction (HER) in a chlorate electrolyte was investigated by measuring the overpotential at 250 mA/cm2 current density (η250). Good performance was found for ratios of 2:1 and 3:1. The HER η250 values for these electrodes were 300 mV lower than that for mild steel cathodes. The electrodes made of the new alloys were very stable in the chlorate electrolyte and had good resistance to poisoning from the solution. The origin of the catalytic activity resulted mainly from ruthenium, and the presence of titanium and oxygen in the alloys was indispensable for the stability of the electrodes.