New approach to improve soil-water characteristic curve to reduce variation in estimation of unsaturated permeability function

Abstract

The unsaturated permeability function is often estimated from the soil-water characteristic curve (SWCC) of a soil. A complete SWCC measurement can improve the estimation of the unsaturated permeability function. In most laboratories, the SWCC can be measured up to a suction of 100 kPa using a Tempe cell. However, complete measurement of the SWCC is an expensive and time-consuming task. Therefore, this paper presents a new approach to estimate SWCC data points beyond 100 kPa suction to complement the SWCC measured up to a suction of 100 kPa. The new SWCC is then used to estimate the unsaturated permeability function. The proposed approach uses knowledge of the grain-size distribution curve and measured SWCC data at 100 kPa suction to estimate the SWCC data points beyond 100 kPa suction. To verify the proposed procedure, SWCC tests were conducted over a wide range of suctions for coarse kaolin and a triaxial permeameter system was used to directly measure unsaturated permeability of the coarse kaolin. The proposed procedure is found to reduce the variation between unsaturated permeability functions estimated by various estimation models.