Abstract
Alumina–carbon nanotubes composites were studied with respect to obtain the homogeneous distribution of nanotubes within the alumina matrix. Disaggregation and uniform dispersion of carbon nanotubes in alumina matrix are crucial requirements for improvement fracture toughness and also electrical conductivity of these composites. New approach comprises functionalisation MWCNTs by acid treatment, stabilisation of alumina/MWCNT dispersion with subsequent freezing has been used, which resulted in formation of granulated homogenous mixture. The ceramic composites were prepared by hot pressing at 1550 °C using these mixtures. Microstructural analysis as well as electrical conductivity measurements has been used for observation of distribution of nanotubes within composites. Electrical conductivity, as an indicator of homogeneity of conductive network distribution, increases from 6 to 1140 S/m when compared the conventional process and approach presented in this work at the same volume fraction of MWCNTs 10 vol.%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.