New advances in the mathematical modeling of the continuous bulk process for the production of high‐impact polystyrene using multifunctional initiators

Abstract

New advances in the mathematical modeling of the bulk continuous high‐impact polystyrene (HIPS) process are presented. The model consists of three modules that allow the simulation of: (1) a polymerization reactor train, (2) a devolatilization (DV) stage, and (3) structure–properties relationships. The model is based on a kinetic mechanism that includes thermal initiation, chemical initiation by sequential decomposition of a multifunctional initiator, propagation, transfer to monomer, transfer to rubber, termination by combination and re‐initiation, as well as high temperature crosslinking and oligomer generation reactions. The present model is comprehensive from a kinetic perspective, since it can be used to simulate a HIPS process using initiators of any functionality and structure. The model is adjusted and validated using previously unpublished experimental data for bulk continuous HIPS polymerization in a pilot‐scale plant. The experimental work includes a series of polymerizations using three different multifunctional initiators: (1) luperox‐331 M80 (L331), (2) pinacolone diperoxide, and (3) diethyl ketone triperoxide. The pilot plant comprised the main stages of an industrial HIPS process: prepolymerization, finishing and DV. Theoretical results show a good agreement with the experimental measurements. POLYM. ENG. SCI., 59:E231–E246, 2019. © 2018 Society of Plastics Engineers