Neutronics–Thermal-Hydraulics–Coupled Transient Analysis for Reactor Power Change in an Inclined Offshore Floating Boiling Water Reactor

Abstract

An application of the boiling water reactor (BWR) to an offshore floating nuclear power plant (OFNP) in Japan is discussed. The BWR-type OFNP has some challenges for practical use, although it has high economic efficiency because of downsizing and simplification. One challenge is understanding reactor kinetics under conditions specific to the marine environment. This study quantitatively clarifies the total and spatial changes in power when the BWR is inclined during regular operation. Therefore, the TRACE (TRAC/RELAP Advanced Computational Engine) and PARCS (Purdue Advanced Reactor Core Simulator) codes were used to perform a three-dimensional neutronics–thermal-hydraulics–coupled transient analysis. The calculation model is based on Peach Bottom II. This study clarifies the changing trend in total and local BWR power by inclination with simplified modeling and conditions. The reasons for such changes are discussed based on changes in several thermal-hydraulic parameters. The difference in BWR power against the inclinations is small. Thus, it is implied that the BWR-type OFNP is expected to have a stable power supply capability during natural disasters. However, to confirm the power stability of the BWR reactor under a full range of offshore external conditions, further research is required. A description of additional research needs that would further support the safety case for this reactor design are discussed.