Neutronic Activity for Development of the Promising Alternative Water-Cooled DEMO Concepts

Abstract

An emerging breeding blanket that fulfills performance criteria, meets the safety requirements, and is reliable enough to meet the plant availability is a challenging issue that assumes complex studies involving numerous neutronic analyses based on the Monte Carlo simulations with MCNP code. Two different concepts are now candidates to be implemented as a driver blanket for DEMO fusion reactor: WCLL (Water-Cooled Lithium Lead) and HCPB (Helium-Cooled Pebble Bed). The current R&D work within the EUROfusion DEMO project is concentrated on a search for the new water-cooled blanket layouts: a deep upgrade of the WCLL blanket to ensure a sufficient tritium breeding capability and an elaboration of the hybrid concept coupling technological advantages of water coolant, lead neutron multiplier, and ceramic breeder. To this end, very detailed, fully heterogeneous MCNP geometry models were developed for the newest designs of the WCLL-db (WCLL-double bundle) and WLCB (Water-cooled liquid Lead Ceramic Breeder) DEMO blankets to verify the new engineering solutions. This makes rigorous calculations possible to find an optimal breeder blanket layout. The basic response, tritium breeding ratio (TBR), was assessed for both concepts, and it appeared to be TBR = 1.16 for the WCLL-db and TBR ≤ 1.13 for the WLCB DEMOs, respectively. Several geometry layouts of the WLCB breeder blanket were investigated to reach the TBR sufficient for a sustainable tritium fuel cycle. Two promising novel solutions were suggested to enhance the tritium breeding performance of the WLCB blanket and to achieve TBR ≥ 1.16: heavy water coolant and an advanced breeder ceramic. Various nuclear safety aspects of the technologies utilized in both blanket concepts are addressed in this work to facilitate engineering decisions aimed at the consolidated blanket design for the upcoming DEMO reactor.