Neutron shielding analysis for a gadolinium doped nickel alloy

Abstract

Rare-earth-nickel (RE-Ni) alloy is a kind of appealing neutron shielding material for advanced reactors and spent fuel storage containers. The incorporation of neutron-absorbing additive RE elements results in a RE-Ni alloy with integrated structural and functional features, which can drastically reduce shielding material weight. Gadolinium (Gd), in comparison to other rare-earth elements, has a much larger thermal neutron absorption cross section, necessitating only a low fraction to achieve the desired shielding capability. Hence, gadolinium is doped into a nickel-based alloy to form a gadolinium-nickel (Gd-Ni) alloy. Due to its extremely low solubility in the nickel phase, gadolinium is commonly manifested as heterogeneously spatially scattered Gd-rich phases in existing preparation procedures of alloys rather than homogeneously distributed gadolinium elements. This would result in a strong neutron tunneling effect, limiting the neutron shielding capability of Gd-Ni alloys. In this work, a superfine layered Gd-Ni alloy doped with Gd-rich phases and arranged in dislocations is proposed to provide an adequate dislocation density of Gd-rich phases to suppress the neutron tunneling effect. With the same Gd content, the thermal neutron shielding ability of a layered Gd-Ni alloy is comparable to the case that Gd is assumed to be an ideally homogeneous distribution in the material. The smaller the particle size of the Gd-rich phase, the weaker the neutron tunneling effect, and the lower the thermal neutron transmission ratio. For a 0.5 cm-thick Gd-Ni alloy, the particle size of Gd-rich phase should be kept within 20μm to achieve a thermal neutron transmission ratio of less than 10−5 for natural gadolinium content of 0.6 at.%. This work provides an important guidance for the design and fabrication of the next-generation neutron shielding materials.