Abstract
In this paper, a neural networks (NNs) enhanced telerobot control system is designed and tested on a Baxter robot. Guaranteed performance of the telerobot control system is achieved at both kinematic and dynamic levels. At kinematic level, automatic collision avoidance is achieved by the control design at the kinematic level exploiting the joint space redundancy, thus the human operator would be able to only concentrate on motion of robot's end-effector without concern on possible collision. A posture restoration scheme is also integrated based on a simulated parallel system to enable the manipulator restore back to the natural posture in the absence of obstacles. At dynamic level, adaptive control using radial basis function NNs is developed to compensate for the effect caused by the internal and external uncertainties, e.g., unknown payload. Both the steady state and the transient performance are guaranteed to satisfy a prescribed performance requirement. Comparative experiments have been performed to test the effectiveness and to demonstrate the guaranteed performance of the proposed methods.
Highlights
I N THE last few decades, the teleoperated robots, known as telerobots, have been widely applied for human unfriendly tasks such as handing radioactive material and searching in dangerous environment
Collision Avoiding Without loss of generality, in this paper we only focus on the cases of collision avoidance that could be achieved using kinematic redundancy mechanism, i.e., the joint motion in the null space of Jacobian Je
The radial basis function neural networks (NNs) (RBFNN) is used to compensate for the unknown dynamics, especially that caused by the unknown payload, to guarantee the steady state performance of the controller
Summary
I N THE last few decades, the teleoperated robots, known as telerobots, have been widely applied for human unfriendly tasks such as handing radioactive material and searching in dangerous environment. To decrease the workload of the human operator, we consider to employ the shared control framework, and embed an automatic collision avoidance mechanism into the teleoperation system, to enable the telerobot safely interact with a dynamic environment. The unknown or varying payload makes it impossible to obtain an accurate dynamics model in advance To solve such problems, the approximation-based control methods have been developed and have been successfully applied on a wide range of practical systems, e.g., formation control [14], multiagent’s consensus control [15], and the robotic manipulator control [16]. The goal of design at the dynamic level is to ensure that the reference trajectory can be tracked satisfying a specified performance requirement in the presence uncertainties
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
