Abstract
Abstract Although increasing the number of switches increases the switch losses, most designed controllers focus on controlling an inverter circuit with more than six switches. The paper aims to address this issue that arises in implementation of the voltage source inverter (VSI) for brushless DC (BLDC) motors. It optimises the sinusoidal pulse width modulation (PWM) controller, minimising total harmonic distortion (THD) while keeping the VSI’s circuit at six switches to avoid increased switching losses. This was achieved by applying an artificial neural network (ANN) to generate a signal, which combines with the already existing reference and carrier signals. The addition of the new signal to the existing signals contributed to generating more pulses compared with the conventional sinusoidal PWM. Simulink was used to design the system and analyse its performance with the conventional and neutral point clamped (NPC) VSI systems. Results indicated that the proposed system performs better when controlled with an LCC filter. Compared with the control experiments, its output waveform has the lowest THD value, which is 6.04%. The switching losses of all the systems were also computed. Results from the computation indicated that the proposed system is capable of reducing the switching losses by 0.6 kW compared with the NPC VSI brushless DC motor (BLDCM) system. BLDCM speed was tested across various conditions; the results are reported in Section 5.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.