Near-to-generator short-circuit analysis in industrial and commercial power systems: the "characteristic" currents method

Abstract

For near to generator short-circuit analysis, it is well known that a rigorous calculation procedure requires the use of complex dynamic models of power system components. In most practical cases, however, it is sufficient to adopt simplified and standard based calculation methods. For these cases the paper suggests a new approach of the short-circuit models of power system components based on the characteristic currents method. The paper, at first, presents a short overview of the IEC Standard 909, assumed as reference for the proposed approach. The calculation assumptions and the simplifications of the IEC Standard are pointed out in order to evidence how the new approach proposed obtains conservative, but more accurate results. The characteristic currents procedure is successively applied to a sample network with external feeder and internal generation and with motor load. The same network is analyzed by means of the IEC procedure and by means of a computer program able to consider dynamic models of electrical equipment. A comparison among these approaches is carried out in order to validate the characteristic currents method. >