Abstract

There is an increasing use in the pharmaceutical industry of barrier systems such as transfer isolators, sterilisation tunnels and work station isolators. As Vapor Hydrogen Peroxide (VHP) sterilisation of isolators and lyophilizers becomes an important sterilisation method, there is an acute need for a VHP monitoring system to be used for in-process control and validation. In this study, near infrared (NIR) spectrofotometry was evaluated as a potential technique to monitor hydrogen peroxide. Additionally the H2O2 vapor permeability of different packaging materials, commonly used in steam and ethylene oxide sterilisation, was evaluated. NIR spectrofotometry, using a gas cell connected with optic fibres, was evaluated as a potential technique to monitor hydrogen peroxide vapor and water vapor during VHP sterilisation of an isolator. A NIR spectrum was taken every 30 s during VHP sterilisation of an isolator. The influence of injection rate, air flow rate, working temperature and gas distribution was investigated. The H2O2 vapor permeability of different packaging materials was determined by placing the gas cell in the sterilisation bags and sealing the bags hermetically. The sterilisation bag was then subjected to VHP sterilisation. The NIR spectra taken at steady state sterilization conditions showed 4 absorption peaks: at 1364, 1378 and 1400 nm attributed to water and at 1420 nm attributed to H2O2 vapor. By measuring the absorbance level at these wavelengths, the actual concentration of H2O and H2O2 vapor in the isolator was calculated. The water vapor permeation of the sterilisation bags, measured with NIR, appeared to be equal for all materials tested. Whereas Tyvek was the most permeable material for hydrogen peroxide vapor (82.7% of the reference concentration outside the bag), only 30% was found in bags made of medical paper. Sterilisation bags consisting of laminate films and PVC sealed to medical paper showed intermediate permeability. Near-infrared (NIR) spectroscopy using a gas cell with optic fibres is a useful technique to monitor VHP sterilisation cycles. There was a difference in H2O2 vapor permeability of different packaging materials, commonly used in steam and ethylene oxide sterilisation.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call