Near-bed mass flux profiles in aeolian sand transport: high-resolution measurements in a wind tunnel

Abstract

Vertical profiles of the streamwise mass flux of blown sand in the near-bed (< 17 mm) region are analysed from high-resolution measurements made using an optical sensor in a wind tunnel. This analysis is complemented by detailed measurements of mass flux and mean velocity profiles throughout the boundary layer depth (0·17 m) using passive, chambered sand traps of small dimensions and armoured thermal anemometers, respectively. The data permit a preliminary analysis of the relations between the observed forms of the profiles of near-bed fluid stress and horizontal mass flux within a carefully conditioned boundary layer. Profiles of mass flux density are found to be characterized by three regions of differing gradient with transitions at about 2 mm and 19 mm above the bed. The exponential decay of mass flux with height is confirmed for elevations above 19 mm, and when plotted as a function of u*2/g (a parameter of mean vertical trajectory height in saltation), the gradient of mass flux in this region scales with the wake-corrected friction velocity (u), where u > 0·30 m s−1. A separate near-bed region of more intense transport below 19 mm is identified which carries 80 per cent of the total mass flux. This region is evident in some previous field and wind tunnel data but not in profiles simulated by numerical models. Ventilated passive sand traps underestimate mass flux in this region by 37 per cent. At slow or moderate wind speeds a third significant region below 2 mm is observed. These regions are likely to be related to grain populations in successive saltation, low-energy ejections and intermittent bed contact, respectively. Optical measurements reveal locally high grain concentrations at some elevations below 5 mm; these heights scale with transport rate, mass flux gradient and wind speed. Copyright © 1999 John Wiley & Sons, Ltd.