Abstract
The drying of electrodes represents a critical process step in the production of lithium‐ion batteries. In this process step, unfavorably adjusted drying conditions can result in deteriorated electrode properties. Furthermore, the process speed is restricted by limited heat and mass transfer in purely convective drying. To counteract those effects, energy input by near‐infrared (NIR) radiation is a promising approach. Herein, analytical considerations are carried out to demonstrate the suitability of infrared radiation with regard to achievable electrode temperatures and drying rates. In an experimental approach, aqueous processed graphite anodes are dried with an NIR module, varying the power and the amount of convection for different experiments. The temperature profiles of the electrodes and the drying rates are measured and analyzed, and the electrodes are subsequently characterized using adhesion measurements. The results obtained show that energy input by NIR radiation during the drying of electrodes can lead to an increased drying speed, electrode temperature during drying, and adhesion force of the dry electrode. These findings indicate that the binder distribution during NIR drying is advantageous in terms of electrode adhesion, compared with convectively dried electrodes produced at comparable drying rates, positioning the process promisingly with regard to high throughput rates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.