Abstract

Problem statement: It was the aim of the study to analyze the level of performance of natural air ventilation with a case study of the traditional Malay house in Penang, Malaysia. This study provided information on the architectural design in relation to natural air ventilation. It promoted passive design in contrast to most housing design which has poor natural air ventilation because the design was orientated to energy consumption that slightly more than one third of the electric energy was used for heating, ventilating and air conditioning systems. Approach: This analysis used quantitative method which measured temperature, humidity and wind speed of the traditional house. The result indicated the level of performance of cross air ventilation and stack effect. Results: The analysis showed that the traditional house has a design integrated with natural air ventilation system. The indoor house temperature and relative humidity had slightly lower than its outdoor area. However, the indoor area had lower wind speed level than the outdoor area. Conclusion: The study showed that maximum openings on the building walls created high air intakes outside the house to give poor performance of stack effect. The design had more emphasis to cross air ventilation.

Highlights

  • This study discusses an influence of natural air ventilation to the design of the traditional Malay house form in Penang, Malaysia

  • The objective of this study is to illustrate that the traditional Malay house has a focus on natural air ventilation

  • The aim of this study is to elicit an argument that natural air ventilation is an important factor in a construction of the traditional Malay houses in Penang, Malaysia

Read more

Summary

Introduction

This study discusses an influence of natural air ventilation to the design of the traditional Malay house form in Penang, Malaysia. The objective of this study is to illustrate that the traditional Malay house has a focus on natural air ventilation (passive design). The reliance on natural air ventilation gains less attention by the architects who prefer to use mechanical cooling (air-condition) system as main factors to provide thermal comfort. Poor passive thermal design in building construction causes the issue become more critical. Almost 68% of the energy is used for Heating, Ventilating and Air Conditioning Systems (HVACs) (Omer, 2008). It leads to the problem of inefficient use of energy

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call