Natural laminar flow airfoil design via adjoint-based transition onset delay

Abstract

This work is focused on the aerodynamic shape optimization (ASO) of airfoils with the aim of attaining natural laminar flow (NLF) designs. The two-equation Amplification Factor Transport (AFT) model is utilized for an accurate prediction of the transitional boundary layer flows. The NLF designs are achieved by utilizing two different objective functions. In the first approach, the conventional drag minimization problem is solved with a target lift coefficient. In addition, a second approach is proposed in this work that directly aims at delaying the transition onset on both the pressure and suction sides, thus expanding the natural laminar flow region around the airfoil. It is shown that by utilizing a sigmoid fitting of the turbulence index profile, the transition onset locations can be accurately predicted in a differentiable and smooth fashion, which is essential to the adjoint-based sensitivity analysis of the RANS solver. The efficacy of the proposed technique for NLF design has been tested for NACA 0012 and RAE 2822 airfoils at moderate lift coefficients. Results have shown that a significantly lower drag count can be achieved by delaying the transition onset locations compared to the case where only a drag minimization is sought. Additionally, the transition onset locations on both sides of the airfoil are delayed using our proposed technique which results in a significant expansion of the natural laminar flow region.