Abstract
This study uses a hybrid method of computational fluid dynamics (CFD) and inverse heat conduction analysis (IHCA) combined with experimental temperatures to investigate the natural convection of plate finned tube heat exchangers with two horizontal tubes located in a chimney. The influence of the position of the two heated tubes on the results obtained is considered. IHCA combined with experimental temperatures is used to estimate h¯ and h¯b. Subsequently, the CFD commercial software combined with the obtained inverse results and experimental temperatures is employed to get the present results. The results reveal that the zero-equation turbulence model can be applied to determine more accurate results than the other two flow models. Therefore, the appropriate flow model for this study is the zero-equation turbulence model. The fringe pattern for each heated tube is mainly aligned in the vertical direction and the two plumes are slightly inclined toward the inward direction. The obtained velocity pattern and air temperature contour are consistent with existing interferometric images or isotherms. The proposed correlation between Ra and Nu agrees with the obtained inverse and CFD results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.