Abstract
In this paper, the slotted dipole antenna structure is proposed to have four narrowband frequencies with ability to be reconfigured. Narrowband reconfiguration can be achieved by controlling the length of slotted dipole by using switches. The narrowband frequency is to be at 1.8 GHz (GSM), 2.4 GHz (WLAN), 2.6 GHz (4G), and 3.5 GHz (5G) respectively. The longest dipole length produced 1.8 GHz, the second-longest dipole length produced 2.4 GHz, the third-longest dipole length produced 2.6 GHz, while the smallest dipole length produced 3.5 GHz. To maintain the stability of the RF current in the system, sixteen capacitors were used. As well eight inductors were used to isolate the RF current and power supply. The PIN diode was used as a switch to allow the induced current to stop and pass into the slot which means that it can be used to select the desired frequency. Depending on switching configuration, the operating frequency is tuned. Good matching is achieved for all configurations. The simulated result of gain for the four operating is higher than 2 dB while the omnidirectional radiation pattern has been obtained thus makes the proposed antenna suitable for wireless application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.