Abstract
The synthetic aperture radar (SAR), as a wideband radar system, operates over a large frequency band ranging from the low very high frequency to millimeter waves. It often overlaps in frequency with other radio-frequency systems including radio, television, and cellular networks. Therefore, radio-frequency interference (RFI) suppression is the severe test for SAR systems. Recently, some methods are proposed to suppress the RFI based on the sparse recovery in range-frequency domain and low-rank extraction in the azimuth dimension. However, all the previous methods exploit one property of the RFI, which may leave the room for performance improvement. Hence, in this paper, we propose three methods to jointly exploit the sparsity and low-rank property of RFI. We first include the sparse term and low-rank term of the RFI in the objective function to separate the RFI and the useful signal, which is defined as the joint sparsity and low-rank property method. It has better performance but heavier computational burden than the algorithm employing only the low-rank property. Then, we use row-sparse (RS) concept in lieu of the two properties, since the narrowband RFI has relatively stable frequencies during the synthetic aperture time. The RS method avoids the low-rank optimization and dramatically decrease the computational burden. Also for the real radar system, the sampling frequency is commonly larger than the frequency bandwidth. Therefore, there are some redundant data in the received signal. We exploit both the downsampling operation and the RS concept to speed up the convergence, which is called the fast row-sparse (FRS) method. The FRS method can further eliminate the out-of-mainband RFI. The real SAR data are provided to demonstrate the effectiveness of the three proposed methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Geoscience and Remote Sensing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.