Abstract
We present a novel surface plasmon resonance (SPR) configuration based on narrow groove (sub-15 nm) plasmonic nano-gratings such that normally incident radiation can be coupled into surface plasmons without the use of prism-coupling based total internal reflection, as in the classical Kretschmann configuration. This eliminates the angular dependence requirements of SPR-based sensing and allows development of robust miniaturized SPR sensors. Simulations based on Rigorous Coupled Wave Analysis (RCWA) were carried out to numerically calculate the reflectance - from different gold and silver nano-grating structures - as a function of the localized refractive index of the media around the SPR nano-gratings as well as the incident radiation wavelength and angle of incidence. Our calculations indicate substantially higher differential reflectance signals, on localized change of refractive index in the narrow groove plasmonic gratings, as compared to those obtained from conventional SPR-based sensing systems. Furthermore, these calculations allow determination of the optimal nano-grating geometric parameters - i. e. nanoline periodicity, spacing between the nanolines, as well as the height of the nanolines in the nano-grating - for highest sensitivity to localized change of refractive index, as would occur due to binding of a biomolecule target to a functionalized nano-grating surface.
Highlights
Plasmon resonances in metallic nanostructures - thin films, nanopillars fabricated on planar surfaces, and nanoparticles - are collective oscillations of the conduction band electrons, which are excited when radiation of certain wavelengths is incident on these nanostructures
The calculations described in this paper have shown that surface plasmon resonance (SPR) sensing using narrow groove plasmonic nano-gratings cannot only enable direct coupling of normally incident light into surface plasmons, it can lead to substantially higher differential reflectance signals on localized change of refractive index in the narrow groove plasmonic gratings - as compared to those obtained from conventional SPR based sensing based on continuous metallic films and the Kretschmann configuration
We have described a novel surface plasmon resonance sensing configuration that is based on narrow groove plasmonic nano-grating structures
Summary
Plasmon resonances in metallic nanostructures - thin films, nanopillars fabricated on planar surfaces, and nanoparticles - are collective oscillations of the conduction band electrons, which are excited when radiation of certain wavelengths is incident on these nanostructures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.