Abstract
In this study, nanotube morphology changes of Ti-xTa-Ag-Pt alloys with Ta content for biomaterials were researched using various experimental instruments. Ti-xTa-Ag-Pt alloys were manufactured in an Ar atmosphere using a vacuum arc-melting furnace with Ta contents of 10 and 50, and then heat-treated at 1100 °C for 1 hr. Nanotube formation of Ti-xTa-Ag-Pt (x = 10, 50 wt%) alloys were performed using a DC power of 30 V in 1.0 M H₃PO₄ + 0.8 wt% NaF electrolyte solution. Surface characteristics were investigated using an optical microscope, X-ray diffractometer, field-emission scanning electron microscope, energy-dispersive X-ray spectroscopy, and Image analyzer (Image J). Ti-10Ta-Ag-Pt alloy had a needle-like structures, and Ti-Ti-50Ta-Ag-Pt showed the mixed structure (equiaxed and needle-like structures). As the Ta content increased, the α-phase decreased and the β-phase increased. The highly ordered nanotubes were formed on the β-phase, whereas disordered nanotubes were formed on needle-like structure of α-phase in Ti-10Ta-Ag-Pt alloy. As the Ta content increases, large and small nanotube diameters became smaller in size. Anatase and rutile phases were formed on the alloy surface. Ta, Ag, and Pt elements were uniformly distributed over the entire surface and at the edge or inside of the nanotube.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.