Abstract
In recent years, there has been growing consideration of renewable energy especially photovoltaic devices. A silicon (Si) based solar cell is the most popularly and frequently considered among the photovoltaic devices, but its bulk thickness issue lowers the performance and hinders widespread application due to the material cost. Also, this thick nature causes difference in length between minority carrier diffusion and sufficient light absorption. To mitigate the issues there have been many recent studies on Si photovoltaic devices adopting nanostructuring strategies to enhance the performance. Therefore, we report two different approaches on recent nanostructuring techniques for photovoltaic devices; bottom-up and top-down processes, which are composed of vapor-liquid-solid, solution-liquid-solid, reactive ion etching with Langmuir Blodgett and metal assisted chemical etching. Those fabrication processes enable the fabrication of nanostructures with a highly ordered and alignment structures leading to enhance the light absorption and have an appropriate thickness of Si substrate regressing Auger recombination. The fabricated nanowire and nanocone array structures outperform existing results with light absorption exceeding 90%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Precision Engineering and Manufacturing-Green Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.