Nanostructured Materials by High-Pressure Severe Plastic Deformation

Abstract

Preface. Acknowledgment. I. Fundamentals of Nanostructured Materials and SPD Processing Deformation Twinning in Nanocrystalline fcc Copper and Aluminum Y.T. Zhu.- High Pressure in Large Plastic Deformation: Effects and Techniques V.N. Varyukhin, B.M. Efros.- Toward Comparison of Alternative Methods for Producing Bulk Nanostructured Metals by Severe Plastic Deformation T.C. Lowe.- Applications of Severe Plastic Deformations for Materials Nanostructuring Aimed at Advanced Properties R.Z. Valiev.- New Applications of the SPD Concept: uSPD Y. Estrin et al.- Mechanisms of Submicron Grain Formation in Titanium and Two-Phase Titanium Alloy during Large Strain Warm Working G.A. Salishchev et al.- Nanostructured and Polycrystalline Ti Anomalies of Low Temperature Plasticity V.Bengus et al.- Modeling of Grain Subdivision during Severe Plastic Deformation by VPSC Method Combined with Disclination Analysis A.A. Nazarov et al.-- II. Advances in SPD Technologies.Ultimate Grain Refinement by ECAP: Experiment and Theory V.1. Kopylov, V.N. Chuvil'deev.- Twist Extrusion as a Tool for Grain Refinement in Al-Mg-Sc-Zr Alloys D. Orlov et al.- Microstructural Characteristics of Ultrafme-Grained Nickel A. Zhilyaev.-Refinement and Densification of Aluminum Nickelides by Severe Plastic Deformation L.J. Kecskes et al.- Low-Temperature Sheet Rolling of TiAl Based Alloys M.R. Shagiev, GA. Salishchev.- Application of Diamond Anvil Cell Techniques for Studying -Nanostructure Formation in Bulk Materials Directly during Severe Plastic Deformation A.N. Babushkin et al.-Anomalous Nitrogen Solubility in Gradient Nanostructured Layer Formed in the Surface of Bulk Iron by Severe Plastic Deformation under Friction Ad. Yurkova et al.- Evolution of Microstructure and Mechanical Properties of Ti-5Mo-5A1-5V Alloy Processed by High Pressure Deformation T.A. Ryumshyna, TE. Konstantinova.- Martensitic Transformations in Nanocrystalline Fe-Cr-Ni and Fe-Mn Alloys B.M. Efros et al.-III. Processing, Microstructures, and Mechanical Properties. Precipitation Behavior in Age-Hardenable Alloys after Severe Plastic Deformation Z. Horita et al.-Understanding the Textural and Microstructural Development in Two-Pass ECAP by route A of a Commercial Aluminium Alloy J.C. Werenskiold, HJ. Roven.- Microstructural Refinement of Bulk Nb and Ta by Severe Plastic Deformation for Composite Superconductor Applications S.N. Mathaudhu.- Modeling Hardening Effects and Grain Size Evolution in Metals Induced by Severe Plastic Deformation z. Mroz, A. Baltov.- Nanocrystalline Structure Formation under Severe Plastic Deformation and its Influence on Mechanical Properties Yu.M. Podrezov.- Structure and Properties of Ti Alloys Processed by ECAP v.v. Stolyarov et al.- Microstructure and Mechanical Properties of 6O82 Aluminium Alloy Processed by Hydrostatic Extrusion P. Widlicki et al.- Grain Refinement and Viscous Fracture of Metals during Severe Plastic Deformation: Mathematical Simulation Yan Beygelzimer.- Structure and Properties of Ultrafme Grained Nickel after Severe Plastic Deformation B.M. Efros,.- Deformation Mechanisms Inducing Microstructure Refinement in Commercially Pure Aluminium Processed via ECAP: Comparison to Cold-Rolling and Hot-Torsion M. Cabibbo, E. Evangelista.-IV. Mechanical Properties. The Deformation Characteristics of Pure Aluminum Processed by Equal-Channel Angular Pressing C. Xu et al.- Microstructural Aspects of Cyclic Deformation and Fatigue of Ultrafine-Grained Metals H. Mughrabi.-. Modelling Mechanical Properties of SPD Materials During and After Severe Plastic Deformation M.J. Zehetbauer, et al.- Unique Deformation Behaviors of the Ultrafine Grained Aluminum Alloys Fabricated by Accumulative Roll Bonding N.Tsuji.-Microstructure and Mechanical Properties of Long, Ultrafine Grained Ti Rods I.P. Semenova. et al.-Improving the Mechanical Properties of Ti-6A1-4V Alloy by Equal Channel Angular Pressing L.R. Saitova et