Abstract
Microbiologically influenced corrosion (MIC) is an unavoidable problem in several industries. Copper (Cu) and its alloys are widely used engineering materials. However, MIC of Cu remains a persistent challenge to their performance and functional lifetime under aggressive environments. This study investigated nanosecond pulsed laser processing (LP), which may enhance the corrosion resistance of Cu. The microstructural evolution and corrosion behavior of LP-Cu in the presence of sulfate-reducing bacteria (SRB) were evaluated. Typical deformation-induced microstructural features of high-density dislocations were analyzed on the top surface of LP-Cu coupon. Electrochemical measurements suggested that LP-Cu coupons exhibited better corrosion resistance in SRB-inoculated solution compared with their original counterpart. The enhanced corrosion resistance by LP primarily resulted from the combined influences of compressive residual stress and work hardening in the surface. However, overlap percentage played a key role in improving corrosion resistance. LP produced optimal corrosion resistance at 50% overlap. Therefore, this study introduces a unique and an option for anticorrosion control in manufacturing processes and potentially implements it onto other materials to improve its microbial corrosion resistance through LP.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
