Abstract
Nanosecond-pulsed, infrared (1064nm) laser irradiation was used to create metal oxide coatings on the surface of polished stainless steel 304L austenite for application as color markings and unique tags/identifiers. By rastering a Gaussian-shaped, focused laser beam across a specimen in air, continuous metal oxide coatings were grown to thicknesses in the range of 20 to ~500nm. Oxide coating thickness generally increased with laser fluence. However, for large accumulated fluences in excess of ~600–800J/cm2, oxide growth was affected by evaporation and particle ejection resulting in a decreased coating thickness. Transmission electron microscopy and X-ray diffraction revealed that oxide coatings developed a polycrystalline, spinel structure having a lattice constant=8.4Å (consistent with MnCr2O4 and Fe3O4). Pulsed laser irradiation and oxide growth modified the composition of stainless steel substrates by reducing the Cr and Mn concentration within the melt zone. The reflectance and chromaticity of laser-fabricated oxide coatings were characterized using spectrophotometry. These optical properties are described in the context of measured oxide thicknesses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
