Nanoscale structuration and optical properties of thin gold films on textured FTO

Abstract

In this work, we propose a methodology to synthesize metallic nanoparticles on textured Fluorine Tin Oxide (FTO) surface by laser irradiations of deposited Au films. In particular, the breakup of the Au films into nanoparticles (NPs) is observed as a consequence of the melting and solidification processes induced by laser irradiations. The mean Au NPs size and surface density evolution are analyzed as a function of the laser fluence. Optical characterizations of the glass/FTO/Au NPs multilayer show, in the absorption spectra, plasmonic peaks due to the Au NPs and an improvement of the light absorption efficiency from the sample with larger Au NPs. The simulated trends of the ratio between the scattering and absorption cross section suggest that the absorption efficiency dominates over the scattering efficiency in the spectral range between 200 and 600 nm. The simulation shows that, by varying the NPs radius from about 18 to 24 nm, the radiation-scattered intensity remains symmetric in forward and reverse directions. These results indicate that the surface coverage size distribution of Au NPs is the key parameter to correlate the structural and optical properties of the glass/FTO/Au NPs multilayer. Furthermore, electrical characterizations highlight a reduction in the sheet resistance of the textured FTO due to the presence of the NPs. We compare these results with those obtained for the same systems when standard furnace annealing processes are used to obtain the Au NPs on the textured FTO surface.