Abstract
One-dimensional grating standards with sub-hundred nanometre pitches are required for calibration of nanometrological instruments. Nanometric lateral scales (design pitches: 100, 60 and 50 nm) for the calibration of nanometrological instruments were designed and fabricated by electron beam cell projection lithography. An offset-locked laser system consisting of an I2-stabilized He–Ne laser and a slave laser was installed in an atomic force microscope with differential laser interferometers (DLI-AFM) for the realization of a continuously, directly length-standard-traceable system and the pitches of the lateral scales were calibrated using the new DLI-AFM. The average pitches were quite close to the design pitches and the expanded uncertainties (k = 2) were less than 0.6% of the design pitches. The developed nanometric lateral scales are of sufficiently high quality and are candidates for certified reference materials (CRMs).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.