Abstract
Two experimental ceramic systems, 3Y-TZP/5Y-PSZ (3Y/5Y) and 4Y-PSZ/5Y-PSZ (4Y/5Y), underwent analysis before (3Y/5Yi or 4Y/5Yi) and after hydrothermal aging (3Y/5Ya or 4Y/5Ya) to simulate low-temperature degradation (LTD). The samples were sintered and characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy, alongside nanoindentation tests to measure elastic modulus (Em) and hardness (H). Assessments were conducted on the external surfaces and at individual layers on cross-sectioned samples at predetermined regions of interest (ROIs). Degraded superficial regions were observed in the cross-sectional SEM images of the 3Y and 4Y zirconia layers after aging. XRD indicated a tetragonal→monoclinic phase transformation in the aged groups for both 3Y (66 % m-ZrO2) and 4Y (29 % m-ZrO2). Raman spectroscopy revealed monoclinic phase amounts of 86 % for 3Y and 62 % for 4Y in the degradation regions observed in the SEM micrographs. Monoclinic phase peaks were virtually no longer detected in either material beyond a depth of 15 μm. Hydrothermal aging significantly diminished the H and Em values for the 3Y and 4Y zirconia surfaces. For the analysis of different zirconia surfaces within the same subgroup, all pairwise comparisons showed statistically significant differences, except for the values of H of 3Y/5Yi and Em for 4Y/5Yi. Regarding the nanoindentation results of cross-sectioned samples, the aging protocol did not affect the H and Em values of the equivalent ROIs (layers), regardless of the bilayered system. However, significant differences in H values were observed among the ROIs (layers) within the same bilayered system. Despite surface changes, nanomechanical properties remained preserved below the surface and at the interfaces of bilayered materials after aging. Nanoscale H values varied among some layers and interfaces, whereas the Em values exhibited differences across certain surfaces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.