Abstract
Tomato wastewater is characterized by a large amount of suspended solids, red color, and bad smell. In this paper, the effect of transmembrane pressure (10, 15, 20 bar), pH (4, 5, 6), and temperature (30, 40, 50°C) on the permeate flux, total hydraulic resistance, and chemical oxygen demand (COD) rejection of tomato wastewater during nanofiltration treatment was investigated. The flux was found to be approximately constant during long-period operation. The flux was reduced as the pH declined, while it was increased as the temperature and transmembrane pressure increased. The hydraulic resistance (at pH 5 & TMP 1.5 MPa) increased from 5.79 × 1013 to 7.25 × 1013 1/m when the temperature increased from 30 to 50°C. The COD rejection was ranged from 75.65 to 85.35%, in which the highest value was obtained at pH 6, TMP 2.0 MPa, and 30°C. The response surface methodology results demonstrated that the quadratic, the two-factor interaction (2.Fi), and the linear polynomial models are highly significant for modeling the flux (R2 = 0.98), hydraulic resistance (R2 = 0.96), and COD rejection (R2 = 0.90), respectively. Numerical optimization determined the optimum conditions based on the highest flux and rejection and the lowest fouling with transmembrane pressure of 20 bars, temperature of 30°C, and pH of 6, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
