Abstract
To determine the potential of nanofibrillated cellulose (NFC) for use as a coating material, we studied the characteristics of several NFC-coated samples on a synthetic fiber sheet. We used two water-based printing methods to characterize the change in print quality and prepared two types of NFC by two different physical treatment methods. Various coat weights were applied onto synthetic fiber sheets, and the printability of the coated sheets was evaluated by ink absorption rates and print density. Ink pigment penetration was characterized with a confocal laser scanning microscope and a scanning electron microscope, with chemical analysis of samples using focused ion beam. The contact angle and the ink penetration rates decreased with increased coat weight of NFC. This result is the opposite of what the Lucas-Washburn equation would predict. For pigment-based flexographic inks, ink pigments were captured at the NFC layer. For dye-based inks, the ink components penetrated and moved through the NFC-coated layer. For ink-jet printing, the print quality improved with the NFC coating.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.