Abstract
Immobilizing nanoparticles (NPs) onto the hydrophobic nanofiber membrane surface is an effective method to enhance its resistance to pore wetting in membrane distillation (MD) due to construction of a hierarchical structure. However, loading NPs onto the fabricated membrane through post-treatment techniques (e.g., electrospray, physical vapor deposition etc.) results in agglomeration of NPs and their weak attachment with membrane surface. To address this issue, we utilize precipitation and crystallization methods to achieve in-situ growth of zinc oxide (ZnO) NPs onto nanofiber surface for intensifying their interaction. Morphological characterization demonstrated that the size and amount of in-situ grown ZnO NPs could be controlled by varying reaction time and concentration of precipitation agent. Furthermore, the resultant nanofiber membrane with higher contact angles (163°) showed stable water flux and effective salt rejection in presence of surfactant and oil. Finally, the kinetics of wetting progression monitored by ultrasonic time-domain reflectometry (UTDR) further confirmed that the early partial wetting induced by surfactants was significantly restrained owing to the hierarchical structure generated by the in-situ grown ZnO NPs. This study suggested the modified nanofiber membrane presented outstanding wetting resistance to low-surface-tension foulants and promise for desalination in MD.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.