Abstract
A series of nanoencapsulated phase change materials with n-tetradecane as the core material and melamine–urea–formaldehyde (MUF)–TiO2 composite as the shell material was developed using a two-step method. Sol-gel and blending modification methods were respectively utilized after the in situ polymerization. The physical, chemical, and thermal properties of the nanoencapsulated phase change material (NEPCM) samples were characterized. Furthermore, a comprehensive performance evaluation system was established based on the efficacy coefficient method. The results indicated that the average diameter of the nanocapsules was significantly increased by the sol-gel modification and was slightly influenced by the blending method. All NEPCMs exhibited high chemical and thermal stability. The NEPCMs modified by the sol-gel method (C14@MUF–TiO2-S1) exhibited the best performance in terms of the encapsulation ratio, melting enthalpy, and onset decomposition temperature, which were 68.6%, 156.2 J·g-1, and 155.36 °C, respectively. C14@MUF–TiO2-S2 exhibited the lowest mass loss of 44.2% at 100 h. For the blending method, C14@MUF–TiO2-B1 had the highest yield of 53.87%. The thermal conductivity of C14@MUF–TiO2-B3 increased up to 88.15% compared with the unmodified NEPCMs. Therefore, modification by the sol-gel method with 2.2 g TiO2 sol had the highest total efficacy coefficient of 0.843 among the samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Colloids and Surfaces A: Physicochemical and Engineering Aspects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.