Abstract
Nanocrystalline ceria powders have been synthesized by combustion technique using citric acid as a fuel and nitrate as an oxidizer. The auto-ignition of the gels containing cerium nitrate and citric acid resulted in ceria powders. A theory based on adiabatic flame temperature for different citric acid-to-cerium nitrate molar ratios has been proposed to explain the nature of combustion reaction and its correlation with the powder characteristics. Specific surface area and primary particle size of the ceria powder obtained through fuel-deficient precursor was found to be approximately = 127 m2/g and 2.5-10 nm, respectively. The combustion synthesized ceria powder when cold pressed and sintered in air at 1250 degrees C for 1 hour resulted in approximately = 96% of its theoretical density with sub-micron grains.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
