Abstract
A two-step mechanical milling followed by a reactive sintering process was used to synthesize Nano TiC-Graphene-Cu composites from a mixture of Cu, Ti, and Graphene (GN) powders in four different compositions, and effects of reinforcements content on the microstructure and mechanical properties were studied. The results showed that a part of GN reacted with Ti atoms in the matrix, leading to the successful formation of hybrid nanocomposites. Uniform distribution of in-situ TiC with nanometer size and unreacted GN in the nanostructured Cu (Ti) solid solution were obtained. Addition of high percentage of the reinforcements led to an increase in the porosity and microhardness, coarsening of TiC nanoparticles, and decreasing the grain size of the matrix after sintering. The simultaneous presence of GN and TiC nanoparticles in the Cu matrix improved the hardness and wear resistance and reduced the friction coefficient by self-lubricating behavior. The nanocomposite with the nominal composition of Ti-40 vol % TiC showed the highest wear resistance and the lowest friction coefficient.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have