Nano emulsion binders for paper coating synthesis and application

Abstract

ABSTRACTThe key objectives of coating papers and paperboards are to improve their aesthetic appearance and printability. Coatings offer smoothness, gloss, brightness, and opacity to the base papers and provide them with enhanced printability, which requires resistance to ink splitting forces, smoothness, ink holdout and gloss, etc. Styrene acrylate latexes were synthesized, via emulsion polymerization, and were formulated as coats for white and brown recycled papers. Both processes were characterized specifically for offset printing. The prepared latexes showed enhanced solid content, viscosity, zeta potential and appropriate glass transition temperature for paper coating formulation. The porosity, gloss and Cobb60 values of coated papers increased with the increased addition of nano-emulsion modified latexes. The formulations afforded high printability (print gloss and print density) with local ground calcium carbonate compared with that of the imported pigment (kaolin). Furthermore, the synthesized binder had higher water resistance than the commercial one; which can tightly be correlated with print quality, printability and productivity and most significantly, permits usage of low viscous ink. Coated recycled brown base gave promising results with respect to print quality although offset printing was utilized. The novelty of this work was not only in employing the local alternative binder and local pigment but also in achieving compatibility with environmental regulations since oil-based inks and recycled papers were also used.