Abstract

Lithium-sulfur batteries are considered a strong contender for next-generation high-energy battery systems given their high gravimetric energy density. However, this battery chemistry is still facing challenges such as the polysulfide shuttle effect caused by the high solubility of long-chain lithium polysulfides (Li2Sn) resulting in active material loss and compromised cycle life. Solid-state polymer electrolytes (SPEs) represent a promising pathway to address this issue by preventing the formation and transport of these undesirable polysulfide intermediates.1,2 Moreover, the application of flexible polymer electrolytes promotes safe high energy batteries for smart textiles.In this study, single lithium-ion conducting solid polymer electrolytes (SLIC-SPEs) based on lithiated Nafion membrane have been investigated, utilizing the chemical and thermal stability of this kind of ionomers. Among others, a mixture of ethylene carbonate (EC) and propylene carbonate (PC) was tested as organic aprotic swelling solvent offering advantageous characteristics such as great chemical stability and high ion mobility while avoiding phase separation issues and undesired leaching.Sulfur-infiltrated ultramicroporous carbon composite cathodes were utilized in combination with the investigated SLIC-SPEs, facilitating a quasi-solid-state lithium-sulfur full cell with carbonate-solvent compatibility and high active material utilization.3 Electrochemical performance of the full cell was investigated elaborately and compared with a reference system using solely the liquid EC:PC solvent. While rapid capacity fading can be observed for the liquid electrolyte cell, an enduring high capacity is found in the lithiated-Nafion system. For better understanding of these effects, cycling analysis was accompanied by implementing impedance spectroscopy upon galvanostatic cycling. The electrochemical characterization indicates the formation of a stable film and high degree of reversibility during cycling of the lithiated-Nafion cell whereas an increased film resistance due to sulfur cross-over and electrolyte decomposition was observed within the liquid electrolyte system.(1) Z. Li, W. Lu, N. Zhang, Q. Pan, Y. Chen, G. Xu, D. Zeng, Y. Zhang, W. Cai, M. Yang, J. Mater. Chem. A 2018, 6 (29), 14330-14338.(2) X. Hao, H. Wenren, X. Wang, X. Xia, J. Tu, J. Colloid Interface sci. 2020, 558, 145-154,(3) M. Nojabaee, B. Sievert, M. Schwan, J. Schettler, F. Warth, N. Wagner, B. Milow, K. A. Friedrich, J. Mater. Chem. A 2021, 9 (10), 6508-6519,

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.