Na2.60Fe1.70(SO4)3 particles embedded in cross-linked graphene oxide networks as high-performance dual-electrode for sodium-ion batteries

Abstract

Sodium iron sulfate materials have been initially applied to sodium ion batteries (SIBs) owing to their high operating voltage and stable electrochemical properties, yet poor conductivity and low theoretical capacity limit its commercial development. Herein, we first prepared Na2.60Fe1.70(SO4)3@graphene oxide (GO) composite via a facile solid-phase ball milling strategy, which are Na2.60Fe1.70(SO4)3 particles embedded in cross-linked GO networks. For the cathode of SIBs, the active particles in the material are wrapped with cross-linked GO networks that increases the electrolyte penetration and ion transport channels as well as improves electronic conductivity, resulting in a high operating voltage of 3.74 V and excellent cycle stability (retains over 70 % of capacity after 500 cycles at 8 C). Notably, the as-prepared material could exhibit a reversible capacity of 100 mAh g−1 after 100 cycles at 0.2 C as anode for SIBs. Furthermore, the material was first used to assemble symmetric sodium-ion full cell, demonstrating excellent electrochemical performance (achieving 60 mAh g−1 at 0.2 C). The Na2.60Fe1.70(SO4)3 particles wrapped with cross-linked GO networks offer a simple and effective approach to enhance the performance of SIBs, making an important contribution towards their practical industrial application.