N-Doped Ordered Mesoporous Carbon Originated from a Green Biological Dye for Electrochemical Sensing and High-Pressure CO2 Storage.

Abstract

Herein, a series of nitrogen-doped ordered mesoporous carbons (NOMCs) with tunable porous structure were synthesized via a hard-template method with a green biological dye as precursor, under various carbonization temperatures (700-1100 °C). Compared with the ordered mesoporous silica-modified and unmodified electrodes, the use of electrodes coated by NOMCs (NOMC-700-NOMC-1100) resulted in enhanced signals and well-resolved oxidation peaks in electrocatalytic sensing of catechol and hydroquinone isomers, attributable to NOMCs' open porous structures and increased edge-plane defect sites on the N-doped carbon skeleton. Electrochemical sensors using NOMC-1000-modified electrode were fabricated and proved feasible in tap water sample analyses. The NOMCs were also used as sorbents for high-pressure CO2 storage. The NOMC with the highest N content exhibits the best CO2 absorption capacities of 800.8 and 387.6 mg/g at 273 and 298 K (30 bar), respectively, which is better than those of other NOMC materials and some recently reported CO2 sorbents with well-ordered 3D porous structures. Moreover, this NOMC shows higher affinity for CO2 than for N2, a benefit of its higher nitrogen content in the porous carbon framework.