Abstract
The S-band low temperature co-fired ceramics (LTCC) ferrite circulator was designed and analyzed based on multilayer chip structure, and the effect of some key problems in the preparing process on the frequency characteristic of the LTCC ferrite circulator was investigated by simulation method. The results show that the LTCC ferrite circulator with hybrid structure, which consists of microwave ferrite layer, ceramic dielectric layer and three-dimensional matching circuit, can provide excellent in-band performance. The cylindrical conductor connects two impedance lines in the three-dimensional wiring circuit of the LTCC ferrite circulator. It is found that the transmission and isolation characteristics of the LTCC ferrite circulator deteriorate rapidly, when the height of port air gap under cylindrical conductor reaches 20 m. In order to resist the significant reduction of the transmission and isolation characteristics, the air gap between microwave ferrite layer and ceramic dielectric layer should not be more than 20 m. Consequently, the matching co-firing between cylindrical conductor and ceramic dielectric layer, and between microwave ferrite layer and ceramic dielectric layer is extremely important to ensure excellent performance of the prepared LTCC ferrite circulator.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.