自走式红枣集条捡拾机的设计与试验

Abstract

Aiming at the problems of single mechanical performance, multi-person operation and low operation efficiency of air-suction jujube harvesting in China, combined with the requirements of mechanized jujube harvesting in Xinjiang, this study designed a self-propelled jujube collection strip pick-up machine. The machine is mainly composed of crawler chassis, landing jujube collection strip device, separation and impurity removal device and hydraulic system. According to the jujube planting mode, the size of the crawler chassis is 1780 mm × 1650 mm × 310 mm. In order to simulate the effect of artificial collecting strips, a reciprocating collecting strip blowing head was designed with a height of 15 cm from the ground, a horizontal and vertical angle of 35° and 15° respectively. The model of the collecting fan is selected as 9-19-4A; the fluid simulation analysis of the separation and impurity removal box is carried out to verify the rationality of the box structure design. The performance of the picker was tested by pick-up efficiency, cleanliness, breakage, and impurity rates. The results show that when the forward velocity was about 0.40 m·s-1 , the average pick-up efficiency could reach 752.7 km·h-1 , the average pick-up cleanliness rate was 95.66 %, the average breakage rate was 2.68 %, and the average impurity rate was 3.64 %. The self-propelled jujube collection strip pick-up machine designed in this experiment meets the requirements of mechanized harvesting of jujube and can realize single-person remote control operation.