Abstract
This paper is intended to develop and study the technology to produce the ceramics of cement mortar by using cement, fritted glaze, silica fume and some special sands. The specimens were casted (2×2×8cm) with this mortar. And after curing, they were fired at 940℃ or 1000℃ for two hours to measure the properties of these specimens before and after firing. As the result, the fritted graze of low fusing point with 20% frits/cement ratios and of 5〜8% silica fume/cement ratios was found to be most suitable for these ceramics of cement mortar. And the most suitable firing temperature for the properties of these specimens after firing is found to be 1000℃. And the surface of these mortar was tested to be colored with the glaze by these firing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Structural and Construction Engineering (Transactions of AIJ)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
