气吸式排种器的气流场特性试验研究

Abstract

The vacuum seed metering device absorbs seeds by using the negative pressure generated by vacuum air flow. Therefore, it is of great significance to study the variation law of pyrolysis gas flow field to improve its seed metering performance. In this paper, the common disc and composite disc were selected as the research objects and tested on the indoor test-bed. The negative pressure was measured by U-type barometer, and the effects of fan speed, suction hole size, seed hole structure and air chamber thickness on the air flow field were studied. Firstly, the influence of fan rotation frequency on vacuum chamber negative pressure is studied, and the variation law of negative pressure in vacuum chamber and fan port of common disc and composite disc under the same frequency is compared. Secondly, the suction holes in the vacuum chamber were numbered, the negative pressure distribution of the suction holes was measured, and the influence of the number and diameter of the suction holes on the negative pressure of the vacuum chamber was studied. Finally, the negative pressure was measured at the distance of 0 to 10 mm from the suction hole to study the effect of seed hole structure on the air flow field. Moreover, increase the additional thickness of the vacuum chamber from 0 to 40 mm to study the influence of the chamber thickness on the distribution of the gas flow field. This paper makes a comprehensive experimental analysis on the influencing factors of air flow field of air suction seed metering device, necessary for future design of air suction seed metering device.